Micro CV Controller

The Micro CV Controller is a low CV to OSC / OSC to CV converter for wireless operation using Bluetooth.

In order to keep the cost and power usage to a minimum, the device has a low chip count. Additionally, the number of I/O pins was reduced to a total of sixteen, as opposed to the sixty-four on the Dumb and Smart Controllers. Eight inputs are assigned as CV inputs while each of the remaining eight pins can be configured as digital inputs or CV outputs. These changes resulted in a device that is only 4.1cm x 5.3cm, which is significantly smaller than the Dumb Controller and Mini CV Controller; and drawing only 10mA of Current (not including the current for each attached sensor), which means that the device can run comfortably on a 9V battery. Click To See Picture

Click here to see price list for Mini and Micro CV controllers

The CV inputs have a 10 bit resolution and are scanned every 6ms, while the Digital Inputs have are scanned every 1ms. The PWM frequency ranges from 1.25kHz for 2 bit resolution down to 66Hz for 8 bit resolution.

You can configure your OSX machine for Bluetooth with the MicoCv converter by following these instructions

This project has been assisted by the Commonwealth Government through the Australia Council, its arts funding and advisory body

You can purchase a Micro CV Controller by clicking on the button below or by sending me an email

In order to facilitate integration into your own instrument, the devices do not come in a case by default; however, a case can be arranged upon request.