To set up the MiniCV Bluetooth device on you Mac OSX Tiger machine, please take the following steps:
Make sure you have a Bluetooth module installed in your computer or a USB Bluetooth module connected to your computer.
Also, make sure your MicroCV is turned on (The yellow LED should be lit)
Select Bluetooth settings from System Preferences
Select Setup new device
Click Continue
Select "Any device" and click continue
Wait for your machine to find the device, then select it. Then click "Passkey Options"
Select "Use specific passkey" and then click Continue
Click Continue
Click Continue
When prompted for a passkey, enter "1111". Then click Continue
Click Continue
Click Quit
Select the new device in the Bluetooth Devices tab and click "Edit serial ports"
Use the default name proved by the configuration. Take not of the name (you can copy it to the clipboard by selecting it and pressing command + C".
Then click "Apply"
In the Bluetooth drivers that you
downloaded, open the file "minicv.ini" with Text edit
In the line starting with "serial", change the text from ".minicv" to the name created in
step 13. Then save the file.
Run the Bluetooth driver by clicking "MiniCV.Command"
The diagnostic window should appear stating a successful open of the device.
Additionally, the LED on your MicroCV should become green.
