To set up the MiniCV Bluetooth device on you Mac OSX machine, please take the following steps for Jaguar or Panther. If you are using Tiger, follow the instructions on TigerbluetoothInstructions.html
- Make sure you have a Bluetooth module installed in your computer or a USB Bluetooth module connected to your computer.
- Open "System Preferences" and click "Bluetooth".
- Select the "Devices" tab.
- Click "Pair New Device".
- On the "Show Only" drop down Select "All Devices"
- On the "Device Category" drop down Select "All Categories"
- Select the MiniCv Bluetooth device and click "Pair".
- Enter the four digits "1111" and click OK".
- The Bluetooth MiniCV device is set up. Quit The Bluetooth Hardware Setup.
To set up the Bluetooth serial port, please take the following steps:
- Open the "Bluetooth Serial Utility", located in the "Applications/Utilities" folder on your hard-disk.
- The "Bluetooth Serial Ports" page will be displayed. Click "New".
- Type the port name "minicv", making sure that it is all in lower case
- Select the "Outgoing" port direction.
- Click "Select Device". The "Select Bluetooth Service" page is displayed.
- Select "MiniCv" and then the "Bluewave" service.
- Click "Select" to close the "Select Bluetooth Service" page.
- Select "RS-232" from the "Port Type" combo box.
- Click "OK".
- The serial port is set up and ready to use.
- Close the "Bluetooth Serial Utility".
If you have any problem doing this, you can ask me questions be sending me an email
Once configured, download and unpack the Mini CV Bluetooth OSC driver for OSX to
convert the incoming Bluetooth serial data to Open Sound Control
